Quanta LB6M commands

From http://www.kontron.com/downloads/software/fastpath-configuration-guide-v1.2.pdf?product=89439

3.2.1.2

Example 2: Set Up VLAN Routing for the VLANs and the Switch.

The following code sequence shows how to enable routing for the VLANs:

(Ethernet Fabric) #vlan database
(Ethernet Fabric) (Vlan) #vlan routing 10
(Ethernet Fabric) (Vlan) #vlan routing 20
(Ethernet Fabric) (Vlan) #exit
(Ethernet Fabric) #show ip vlan
This returns the logical interface IDs that will be used
instead of slot/port in subsequent routing commands.
Assume that VLAN 10 is assigned ID
2/1 and VLAN 20 is assigned ID 2/2.
Enable routing for the switch:
(Ethernet Fabric) (Config) #config
(Ethernet Fabric) (Config) #ip routing
(Ethernet Fabric) (Config) #exit
The next sequence shows an example of conf iguring the
IP addresses and subnet masks for the virtual router
ports.
(Ethernet Fabric) (Config) #config
(Ethernet Fabric) (Config) #interface 2/1
(Ethernet Fabric) (Config) (Interface 2/1) #ip address 192.150.3.1 255.255.255.0
(Ethernet Fabric) (Config) (Interface 2/1) #exit
(Ethernet Fabric) (Config) #interface 2/2
(Ethernet Fabric) (Config) (Interface 2/2) #ip address 192.150.4.1 255.255.255.0
(Ethernet Fabric) (Config) (Interface 2/2) #exit
(Ethernet Fabric) (Config) #exit

(S2) #ip ssh server enable

 

(S2) #show spanning-tree mst port summary 0 all

            STP                  STP            Port
Interface   Mode   Type         State           Role       Desc
--------- -------- ------- ----------------- ---------- ----------
0/1       Enabled          Disabled          Disabled
0/2       Enabled          Disabled          Disabled
0/3       Enabled          Forwarding        Root
0/4       Enabled          Discarding        Alternate
0/5       Enabled          Disabled          Disabled
0/6       Enabled          Disabled          Disabled
0/7       Enabled          Disabled          Disabled
0/8       Enabled          Disabled          Disabled
0/9       Enabled          Disabled          Disabled
0/10      Enabled          Disabled          Disabled
0/11      Enabled          Disabled          Disabled
0/12      Enabled          Disabled          Disabled
0/13      Enabled          Disabled          Disabled
0/14      Enabled          Disabled          Disabled
0/15      Enabled          Disabled          Disabled

(S2) #show port all

                  Admin    Physical   Physical   Link   Link    LACP   Actor
 Intf      Type   Mode     Mode       Status     Status Trap    Mode   Timeout
--------- ------ --------- ---------- ---------- ------ ------- ------ --------
0/1              Enable    10G Full              Down   Enable  Enable long
0/2              Enable    10G Full              Down   Enable  Enable long
0/3              Enable    10G Full   10G Full   Up     Enable  Enable long
0/4              Enable    10G Full   10G Full   Up     Enable  Enable long
0/5              Enable    10G Full              Down   Enable  Enable long
0/6              Enable    10G Full              Down   Enable  Enable long
0/7              Enable    10G Full              Down   Enable  Enable long
0/8              Enable    10G Full              Down   Enable  Enable long
0/9              Enable    10G Full              Down   Enable  Enable long
0/10             Enable    10G Full              Down   Enable  Enable long
0/11             Enable    10G Full              Down   Enable  Enable long
0/12             Enable    10G Full              Down   Enable  Enable long
0/13             Enable    10G Full              Down   Enable  Enable long
0/14             Enable    10G Full              Down   Enable  Enable long
0/15             Enable    10G Full              Down   Enable  Enable long
0/16             Enable    10G Full              Down   Enable  Enable long
0/17             Enable    10G Full   10G Full   Up     Enable  Enable long
0/18             Enable    10G Full              Down   Enable  Enable long